The RCJ33 flush-mounted receiver receives transmission codes from up to 200 programmed secwave radio transmitters and triggers a 5-second pulse on the connected device via a pulse output (changeover).

This enables, for example, the safe control of a door buzzer via radio. In addition, a button input is available so that the pulse can also be triggered via wire by a key switch.

The flat design facilitates installation in flush-mounted sockets, behind switches or behind sockets.

Technical specifications
Coding secwave, AES 128-bit encryption
Up to 200 transmitters can be programmed.
Not compatible with Easywave products!
Frequency 868,30 MHz
Channels 1
Power supply 12-24 V AC/DC
Power consumption
(at 24V AC)
0.2 W standby
1.0 W relay switched (without load)
Operating mode PULSE (5 seconds)
Input 1 external button
Output 1 potential-free relay contact (changeover)
Maximum contact load AC: 60V / 1A / 60VA
DC: 30V / 1A / 30VA
Operating temperature -20 °C to +45 °C
Dimensions 43 x 42 x 17,5 mm
Scope of delivery
  • Flush-mounted receiver, pulse output (5s)
  • Operating manual
Product numbers Description
RCJ33S5001A01 Flush-mounted receiver, secwave, 12-24V, 1x pulse output (5s), potential-free, button input
Wiring diagram