RX22 Transceiver module
The transceiver module RX22 can send and receive Easywave, Easywave neo and secwave telegrams.
It can therefore use all operating modes of any ELDAT product and is often used in a control center for smart home systems.
The RX22 is controlled by commands in HEX format via a UART interface. The software required for this must be created by the user.
A PCB antenna is already integrated on the module, so that only the power supply and data lines need to be contacted for commissioning.
For further information, a detailed interface description or sample code, please contact our sales department.
It can therefore use all operating modes of any ELDAT product and is often used in a control center for smart home systems.
The RX22 is controlled by commands in HEX format via a UART interface. The software required for this must be created by the user.
A PCB antenna is already integrated on the module, so that only the power supply and data lines need to be contacted for commissioning.
For further information, a detailed interface description or sample code, please contact our sales department.
RX22ENS5031A03-U
Technical specifications
| Coding | Easywave Easywave neo secwave |
| Frequency | 868,30 MHz |
| Channels transmit | Easywave: 128 Easywave neo: 128 secwave:128 |
| Channels receive | Easywave: unlimited Easywave neo: 128 secwave:128 |
| Power supply | 1,8V - 3,6V DC |
| current consumption | 46 mA max. at 3V DC |
| Operating temperature | -20 °C to +85 °C |
| Dimensions | 28,83 x 18,80 x 1,00 mm, Grid: 2 mm |
| Weight | 2 g |
Scope of delivery
- Transceiver module
Models
| Product numbers | Description |
|---|---|
| RX22ENS5031A03-U | Transceiver module, Easywave, Easywave neo, secwave, 128 serial numbers each, w/o pin header |
Instagram
LinkedIn