With the bidirectional RCJ34 flush-mounted receiver, two non-floating outputs can be switched independently of one another with Easywave transmitters.
In addition, the outputs can also be controlled separately on site via the two existing button inputs.

The operating modes available are the ON/OFF function in 1-button and 2-button operation, as well as the DEADMAN function.
Programming is simply done on the device by pressing a button or via radio using remote learning (POTA).

The flat design facilitates installation in flush-mounted sockets, behind switches or behind sockets.

Technical specifications
Coding Easywave neo
Up to 32 transmitters can be programmed
Frequency 868,30 MHz
Channels 2
Power supply 230 V AC, 50 Hz
Power consumption 0,4 W standby
0,8 W relay switched (without load)
Operating modes ON/OFF (2-button operation)
ON/OFF (1-button operation)
Input 2 external buttons
Output 2 potential-loaded relay contacts (normally open)
Maximum contact load resistive load: 5 A / 1150 VA
inductive load: 3 A / 690 VA
Operating temperature -20 °C to +45 °C
Dimensions 43 x 42 x 17,5 mm
Scope of delivery
  • Flush-mounted receiver
  • Operating manual
Product numbers Description
RCJ34EN5002A01-K Flush-mounted receiver, Easywave neo, 230V, 2x normally open, potential-loaded, button input
Wiring diagram