ELDAT

Universal-Receiver RCU08 (IP66)

  

With the Universal Receiver RCU08 either two lamps or a motor for shutters/awnings or garagedoors can be operated.

The receiver is protected against watersplashes and can therefore be used outdoors..

32 transmission codes can be memorized. It is possible to allocate an individual operation mode as well as timer functions to each transmitter.

Additionally the receiver can be controlled by an external button.

Universal-Receiver RCU08 (IP66)

RCU08-5002E-01

  

Technical Details
Coding not necessary, unit "learns" transmission code, up to 32 transmission codes can be memorized
Channels 2
Power Supply 230V AC
Control UP/DOWN (2-button-control)
UP/STOP/DOWN (4-button-control)
ON/OFF (1-button-control)
ON/OFF (2-button-control)
ON or OFF (1-button-control)
Timer (1-button-control)
Output 2 separate relay contacts
(1x normally open, 1x change-over contact)
Max. Contact Duty see table of loads
Degree of Protection IP66
Operating Temperature -20 °C to +60 °C
Dimensions 180 x 94 x 66 mm

  

  • Scope of Delivery
  • Universal-Receiver
  • PG-Screw Fittings Set
  • Operating Manual

  


Models
Product KeyDescription

Frequency

RCU08-5002E-01 Universal-Receiver

868,30 MHz

  

  

Connection Diagramn

  

Connection Diagram

  


Table of Loads
Type of load

max. Load

motors 230 V, 50 Hz

4,0 A / 920 VA

resistive load lamps, 230 V halogen lamps etc.

10,0 A / 2.300 VA

inductive load halogen lamps with wound transformers
(min. load of transformer 85%)

2,6 A / 600 VA

non- or serial-compensated fluorescent tubes with
ferromagnetic ballasts

10,0 A / 2.300 VA

parallel-compensated fluorescent tubes with ferromagnetic
ballasts

2,6 A / 600 VA

capacity EVG: electronic cut-in units, electronic transformer
etc.

4,0 A / 920 VA

  

  

Data Sheet
Operating Instructions
Declaration of Conformity

  • © 2009 ELDAT GmbH